Water Treatment Diffuser
Geo Pimec Water Treatment Diffuser
The GEO-PIMEC WT Diffuser is the most powerful and cost-effective clarifier on the market today.
The GEO-PIMEC WT Diffuser is the most powerful and cost-effective clarifier on the market today. Its capacity puts it in a class by itself. There is no comparable system on the market with flow capacity, separation ability, low power consumption, and ease of use. The GEO-PIMEC WT Diffuser is completely scalable to increase capacity as required.
The operation is simple. This process does not require highly technical individuals such as mechanical engineers to operate. Training time to field operation is minimal. This GEO-PIMEC WT Diffuser provides clean liquids with 99.6% solids removal.
The GEO-PIMEC WT Diffuser provides a solution that will help sustain the environment, maximize well production, minimize water waste and increase the bottom line.
Features and Benefits of The GEO-PIMEC WT Diffuser
The entire well is drilled within the volume parameters of the rig tanks and the Diffuser.
Drilled solids are dewatered.
44%-50% reduction in water & brine volumes.
Entirely closed-loop – managed and contained.
Increased Rate of Penetration (ROP).
Shale stability control.
Extended drilling bit life.
The Diffuser can tie into a centrifuge for greater versatility on different mud sections, no change out, and less non-productive time.
Ability to change tube settlers for differing formations, which ensures better separation.
Excellent for the cleanup of fracking fluids, remote sumps, and pits.
Processes 100% of the flow from the drilling rig.
99.6% solids removal.
50% to 70% reduction in water/drilling fluid use.
A one-load system reduces trucking costs.
35’x12’x12’ small footprint on location.
Low power consumption – 70 horsepower.
Ability to process 1250 gallons per minute, (2500 gallons if a second pump is added).
Reduction in disposal costs.
Drilling fluid savings as fluid is reused from well to well.
Ease of operation for technicians.
Eliminate or reduce in-ground sumps or pits.
Reduction in chemical costs.
Reusable drilling fluid, therefore, reduced drilling fluid costs.
Applications.
Potential achievements at Well Site
50% less freshwater usage vs. conventional systems.
75% less brine usage vs. conventional systems.
90% less fluid haul-off vs. conventional systems.
100% of the drilling fluid reused.
Water conservation ~ 9,500 bbl. per well.
The overall cost is lower than conventional systems.
Reducing onsite costs allows for marginal wells to be profitable.
Reduction in footprint at the well site.
Eliminates reserve pits.
Closed-loop drilling is beneficial as no centrifuge is required.
Clear fluid to Total Depth (5,500 ft. True Vertical Depth, 10,000 ft. Measured Depth) o another approximate result with a higher rate of penetration with no solids/increased life of the drill bit.
Fluids can be weighted up with CaNO3 (fertilizer) to hold back pressure shale
Ability to reuse fluid on multiple wells.
Reduction in lease construction costs (Smaller pumps or elimination of pumps).
Waste Reduction Benefits
99.6% solids removal.
50% to 70% reduction in water/drilling fluid used.
A one-load system reduces trucking costs.
Low power consumption.
Reduction in disposal costs.
Ease of operation for technicians.
Eliminate or reduce in-ground sumps or pits.
Reduction in chemical costs.
Reusable rainwater.
Conventional Water Treatment systems versos GEO-PIMEC WT Diffuser comparison chart available upon request at info@geopimec.com.